home *** CD-ROM | disk | FTP | other *** search
- Path: sn.no!usenet
- From: hekr@oslonett.no (Henning Kristiansen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: GVP Scsi series II troubles with a4000
- Date: 22 Feb 96 15:03:45 -500
- Organization: SN Internett
- Message-ID: <1081.6626T903T2291@oslonett.no>
- References: <31284c93@freenet.hut.fi>
- NNTP-Posting-Host: fp6-ppp15.oslo.net
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
-
- >I have a Gvp Scsi series II mounted into my a4000/40. The board mount
- >gvpscsi.device 3.7 in rom, and it's too old for the a4000 (it works
- >fine on a2000) so i must load 4.15 via software, but ofcourse i loose
- >the boot from scsi.
-
- >I desperately need a 4.x ROM (not software, i need the rom!) or
- >someone who could program it for me (i think it's legal now because
- >Gvp is dead, right ?). I want to buy it, no matter where you live.
-
- >Also, what's the maximum transfer i can get with that controller on my
- >a4000 ? (i've 2mb on the board) I tested a 5,25 full size Seagate hd,
- >and it was running at 800k/sec. Tested the same hd on a2000 gvp combo
- >030/scsi was running at 2.4 mb/sec. It's impossible to get high
- >transfer rates with gvp series II (zorro2) ?
-
- This will not help you wery much, But i had the same problem with my GVP scsi
- card in my A4000/040!!!!
-
- When i got my Quantum 1.08 F-II SCSI HD it did reads on 7xxkb/s
-
- Hint: do the same as i did! Fastlane >:))
-
- Now it reads 4.2mb/s !!!!!!
-
- <sb> Henn!ng Kr!st!ansen / A4ooo/o4o Loaded W!th Fun
-
-